Month: April 2018

Updated guide to setting up an APRS RX only iGate using a Raspberry Pi, RTL-SDR dongle and a pre-built image

Initial test of the RPi and RTL-SDR Dongle APRS RX only iGate using Raspbian Stretch

** image has been updated as of 21/04/2018 to resolve the problems some people had booting their Pi ** This post is an updated version of the original article I wrote in February 2017.  It’s using Raspbian Stretch rather than Raspbian Jessie, has Direwolf 1.4 instead of Direwolf 1.3 and the method used to start […]

Statistics for the first quarter of 2018

Breakdown of QSOs made during the first quarter of 2018 using G6NHU and M7P

I’ve had a good first quarter of 2018, partly helped because I dropped the legs of my OCFD towards the end of last year, cable tied my smartuner to the bottom of the mast and put up an inverted L which gave me access to the lower bands.  It works better than my old doublet […]