QSO365 https://validator.w3.org/feed/docs/rss2.html How to disable logging on an Inovato Quadra 4K running HamClock to prevent the log from filling up. A detailed look at three different methods of operating the low power WSPR mode Data (RTTY/PSK) contesting – The anatomy of an ideal QSO G6NHU-2 DX cluster I’ve worked 300 DXCC entities HamClock is not dead! How to set up a HamClock for your shack HamClock backend switching Working ZS8W New RTTY contest – Friday 4th October 2024 That’s N5J in the log for DXCC #304 How to enable cross band repeater on an Icom ID-5100E What is QSO365? One Month. One Challenge. One World Wide Award. 200 DXCC entities worked on 17m FT8 How to disable logging on an original Inovato Quadra running HamClock to prevent the log from filling up. HamClock A new year, a new callsign N1MM Logger+ I built a Stratum 1 NTP Time Server Reverse engineering HamClock – Can you help? 100 QSOs to work 100 DXCC entities Audio snippets Review of 2022 QSO365 #3 is complete – Ten QSOs per day in 2021 Why you might want to try using my DX Cluster DX Century Club – RTTY Replacing a rubbish foot switch Setting up an APRS RX only iGate using a Raspberry Pi, RTL-SDR dongle and a pre-built image Updated guide to setting up an APRS RX only iGate using a Raspberry Pi, RTL-SDR dongle and a pre-built image How to set up a Yaesu System Fusion reflector (YSFReflector) A tip for adjusting the Pwr slider in WSJT-X Some equipment changes – I’ve got a new amplifier Contest results Thank you The end of HamClock? New things you can do in HamClock How to use the new “On The Air” pane and Title with HamClock 4.09 Acom 1500 HF+6M Linear Amplifier user review My ‘new’ HF aerial – A SteppIR UrbanBeam Rebuilding and raising my ADS-B receiver My first ever RTTY contact Are you transmitting illegally on 70cms? ADS-B I have deliveries! New aerial – I’ve decided! Accurate time keeping on an Apple Mac running macOS Big Sur for FT8, FT4 and WSPR Working JA via long path grey-line propagation on 17m. A sked with the Falkland Islands How to build a shack clock using a Raspberry Pi and a 7″ Touch Display.